CalBoy
May 3, 02:29 AM
Really, most opinions I see in the US to keep the imperial system is because you're not accustomed to it. Fahrenheit being more accurate than Celsius or Kelvins, really? Just add a decimal, that's the beauty of it, you add a decimal point or a factor of ten and Earth doesn't suddenly implode.
I know this sounds incredulous and insulting, but people are terrible at math. The more of it you make them think about (whether it's decimals or fractions or anything else) the worse they perform. It's why you'll see almost every recommended quantity expressed as a whole number. It reduces error for the untrained, and makes expressing the value simpler.
Is it change just for change's sake? Up to you, basically everyone else on Earth made their choice. ;)
Did they really? How many people, after you factor out colonization, dictatorship, and a complete absence of prior standardization, actually switched? I can think of only a few countries, none of which were as large and as diverse as the US is.
Besides, it's not as if sciences and engineering are out of the loop. Only civilian uses are Standard. How does it affect you, a Canadian, if grandma bakes using cups and Fahrenheit?
I think I have to disagree. It may be easier for Americans to grasp the "highs" and "lows" of the Fahrenheit scale, but any European would have a different concept of high and low. Also, the difference in Celsius units is rather insignificant. For example, the difference between 37 and 38 degrees Celsius is 1.8 degrees Fahrenheit, hardly a noticeable difference when it comes to weather forecasts.
No, but 1.8 is a big difference when it comes to taking a baby's temperature or figuring out if your meat is done just right. For a child, 99 is considered a mild fevor and is 37.22. 98.6 is considered "normal" and is 37 flat in C. However, if you had a mother trying to keep track of her child's fever over a period of time, the small variations between those two temps would be a lot more important. The total variation between 99, 99.5, and 100 F is so small on the C scale (37.22, 37.5, 37.77) that it's a lot easier to make mistakes in recording or reporting the results. Sure it's easy to do when it's your job in a professional setting, but lay people make mistakes all the time. Using a scale that makes the number differences larger (and psychologically significant, because you can bet no mother is going to forget that her child has a fever of 100) helps reduce those errors.
I'm not so sure. If a recipe calls for 2 tablespoons, is it not just as easy to measure out 30ml? Might using one graduated measuring "cup" be easier than a series of various-sized spoons and cups? For dry goods, grams are easily measured on a scale. With practice and experience, it's quicker and more precise than measuring exactly three cups of leveled flour: you can just sift the flour into your mixing bowl until the scale reads 375 grams. Indeed this method uses less dishes, too.
There are a lot of measuring cups and spoons that do come graduated these days (no, they're not in the "beyond" section of BBB), but it's not always possible to go by weight. Weight also doesn't solve much because it would add an additional piece of equipment that isn't needed for a lot of recipes. It's also impractical to keep weighing out ingredients, especially if their net weight is going to be in the few grams. You also probably wouldn't save any dishes because flour is usually added into other wet ingredients like butter and sugar separately, so a second bowl would be used regardless.
Other than that, any vessel marked "30ml" used for measuring would essentially be a tablespoon. A rose by any other name, really. Except that the 30ml rose is clunkier to say. In fact, you'd still need names for all of the common measures even using SI. Is everyone really going to go around calling a cup the "237ml vessel?" Are people going to start calling it the "liter quartet of milk?" What would you do for the measures that have a secondary meaning? Will people still be able to call it a "pint" if it's sold as 500ml?
Are there really any benefits to the Customary scale, or do we just perceive benefits because it's what we're used to? And if the latter is the case, why make American students learn two systems of units when one fulfills all needs?
There are some (albeit few these days). For daily tasks, the composite numbers in Imperial units are easy to halve and quarter. This has less relevance today with prepackaged food and digital equipment, but at one time it made practical sense for a lot more uses. The residual benefits are still present in home baking and similar activities where base 10 doesn't help, but those are the few things that still make heavy use of standard units anyhow. I don't think it's that onerous to know these days, especially with apps, Google, and conversion charts everywhere around us.
I know this sounds incredulous and insulting, but people are terrible at math. The more of it you make them think about (whether it's decimals or fractions or anything else) the worse they perform. It's why you'll see almost every recommended quantity expressed as a whole number. It reduces error for the untrained, and makes expressing the value simpler.
Is it change just for change's sake? Up to you, basically everyone else on Earth made their choice. ;)
Did they really? How many people, after you factor out colonization, dictatorship, and a complete absence of prior standardization, actually switched? I can think of only a few countries, none of which were as large and as diverse as the US is.
Besides, it's not as if sciences and engineering are out of the loop. Only civilian uses are Standard. How does it affect you, a Canadian, if grandma bakes using cups and Fahrenheit?
I think I have to disagree. It may be easier for Americans to grasp the "highs" and "lows" of the Fahrenheit scale, but any European would have a different concept of high and low. Also, the difference in Celsius units is rather insignificant. For example, the difference between 37 and 38 degrees Celsius is 1.8 degrees Fahrenheit, hardly a noticeable difference when it comes to weather forecasts.
No, but 1.8 is a big difference when it comes to taking a baby's temperature or figuring out if your meat is done just right. For a child, 99 is considered a mild fevor and is 37.22. 98.6 is considered "normal" and is 37 flat in C. However, if you had a mother trying to keep track of her child's fever over a period of time, the small variations between those two temps would be a lot more important. The total variation between 99, 99.5, and 100 F is so small on the C scale (37.22, 37.5, 37.77) that it's a lot easier to make mistakes in recording or reporting the results. Sure it's easy to do when it's your job in a professional setting, but lay people make mistakes all the time. Using a scale that makes the number differences larger (and psychologically significant, because you can bet no mother is going to forget that her child has a fever of 100) helps reduce those errors.
I'm not so sure. If a recipe calls for 2 tablespoons, is it not just as easy to measure out 30ml? Might using one graduated measuring "cup" be easier than a series of various-sized spoons and cups? For dry goods, grams are easily measured on a scale. With practice and experience, it's quicker and more precise than measuring exactly three cups of leveled flour: you can just sift the flour into your mixing bowl until the scale reads 375 grams. Indeed this method uses less dishes, too.
There are a lot of measuring cups and spoons that do come graduated these days (no, they're not in the "beyond" section of BBB), but it's not always possible to go by weight. Weight also doesn't solve much because it would add an additional piece of equipment that isn't needed for a lot of recipes. It's also impractical to keep weighing out ingredients, especially if their net weight is going to be in the few grams. You also probably wouldn't save any dishes because flour is usually added into other wet ingredients like butter and sugar separately, so a second bowl would be used regardless.
Other than that, any vessel marked "30ml" used for measuring would essentially be a tablespoon. A rose by any other name, really. Except that the 30ml rose is clunkier to say. In fact, you'd still need names for all of the common measures even using SI. Is everyone really going to go around calling a cup the "237ml vessel?" Are people going to start calling it the "liter quartet of milk?" What would you do for the measures that have a secondary meaning? Will people still be able to call it a "pint" if it's sold as 500ml?
Are there really any benefits to the Customary scale, or do we just perceive benefits because it's what we're used to? And if the latter is the case, why make American students learn two systems of units when one fulfills all needs?
There are some (albeit few these days). For daily tasks, the composite numbers in Imperial units are easy to halve and quarter. This has less relevance today with prepackaged food and digital equipment, but at one time it made practical sense for a lot more uses. The residual benefits are still present in home baking and similar activities where base 10 doesn't help, but those are the few things that still make heavy use of standard units anyhow. I don't think it's that onerous to know these days, especially with apps, Google, and conversion charts everywhere around us.
KnightWRX
Apr 6, 07:35 AM
Apple brought design elements to desktops and delivered us from the tan box tower.
Apple wasn't the first to break from the Beige box syndrome. ;) In fact, I think I know where they got the idea for the Blue G3 case :
http://blakespot.com/sgi/images/sgi_open1.jpg
Apple wasn't the first to break from the Beige box syndrome. ;) In fact, I think I know where they got the idea for the Blue G3 case :
http://blakespot.com/sgi/images/sgi_open1.jpg
QCassidy352
May 8, 05:25 PM
The usefulness of MobileMe just doesn't justify the $99 pricetag -- especially when other services offer something similar for free.
I disagree. First, nobody else offers it all in one place. Second, nobody else has the same simplicity. Third, there are features (most notably, find my iphone) that can't be replicated no matter what other service you use. And when you consider that you can get MM for $60 at Amazon and elsewhere, I think it's more than worth it. $5/month is worth it for any of things I just listed, or even just to be ad-free.
I disagree. First, nobody else offers it all in one place. Second, nobody else has the same simplicity. Third, there are features (most notably, find my iphone) that can't be replicated no matter what other service you use. And when you consider that you can get MM for $60 at Amazon and elsewhere, I think it's more than worth it. $5/month is worth it for any of things I just listed, or even just to be ad-free.
shompa
Aug 7, 04:26 PM
Not really significantly faster than the G5 Quad. Maybe 50% faster at best. As owner of a Quad G5 my motivation would be more about the 6 bays and the FW 800 on the front than the speed. :)
The G5 is almost as fast per clock cycle.
Apple COULD have released quad G5 3ghz instead, but they want us to use Intel.
The whole Intel project is beacuse of no G5 laptop.
Stupid IBM. I do not like X86, the play plattform.
But, I have changed all my PPC macs to Intel now.
Macbook pro, Macbook, macmini and today a Macpro.
The G5 is almost as fast per clock cycle.
Apple COULD have released quad G5 3ghz instead, but they want us to use Intel.
The whole Intel project is beacuse of no G5 laptop.
Stupid IBM. I do not like X86, the play plattform.
But, I have changed all my PPC macs to Intel now.
Macbook pro, Macbook, macmini and today a Macpro.
Multimedia
Sep 16, 06:41 PM
Except that Apple has typically released only the 15 inch model before later introducing the 17 (and 12 when they existed) when they do major updates. Witness the introduction of the Al case and the Intel switch. Of course it matters whether this is a major update. If, like the iMacs, there is not a major case redesign and it is just a processor bump then expect them to be released simultaneously. But if there is a change in case, I would be surprised (pleasantly though) if the 17 came out at the same time.You need to brush up on your Mac history.
Original Aluminum PowerBook G4 was only 17" for 8 long months (http://www.everymac.com/systems/apple/powerbook_g4/stats/powerbook_g4_1.0_17.html) introduced January 7, 2003 at MacWorld Expo SF by Steve Jobs. It ran at 1GHz and had two USB 1.1 ports. :p
The first 15" PM G4 in an Aluminum case running @ 1GHz & 1.25GHz (http://www.everymac.com/systems/apple/powerbook_g4/stats/powerbook_g4_1.25_15.html) with two USB 2 ports didn't appear until Paris Apple Expo September 16 also introduced by Steve Jobs in his Paris keynote that morning. At that same time the 17" lost the USB 1.1 ports and went USB 2 also as well as to a top speed of 1.33GHz (http://www.everymac.com/systems/apple/powerbook_g4/stats/powerbook_g4_1.33_17.html). Only 3 short years ago today. :eek: ;)
So there is no predictable introduction order. But this time it MUST be the whole line because of the C2D leap. ;)
Original Aluminum PowerBook G4 was only 17" for 8 long months (http://www.everymac.com/systems/apple/powerbook_g4/stats/powerbook_g4_1.0_17.html) introduced January 7, 2003 at MacWorld Expo SF by Steve Jobs. It ran at 1GHz and had two USB 1.1 ports. :p
The first 15" PM G4 in an Aluminum case running @ 1GHz & 1.25GHz (http://www.everymac.com/systems/apple/powerbook_g4/stats/powerbook_g4_1.25_15.html) with two USB 2 ports didn't appear until Paris Apple Expo September 16 also introduced by Steve Jobs in his Paris keynote that morning. At that same time the 17" lost the USB 1.1 ports and went USB 2 also as well as to a top speed of 1.33GHz (http://www.everymac.com/systems/apple/powerbook_g4/stats/powerbook_g4_1.33_17.html). Only 3 short years ago today. :eek: ;)
So there is no predictable introduction order. But this time it MUST be the whole line because of the C2D leap. ;)
ghostlines
Mar 31, 07:22 AM
Does anyone know if you can now print highlighted text like you can in Windows? Since they're adding the age old full-screen window feature, I think this feature would also be a welcome addition.
spazzcat
Mar 29, 09:18 AM
how many of those apps sell music and movies for use on portable devices?
very short haircuts for women
short haircuts for older
short haircuts for older women
short hair styles for women
very short haircuts for women
very short haircuts for women
popular short haircuts for
short haircuts 2011 for older
short haircuts for older women
really short haircuts for
cute short haircuts for older
short haircuts for older women
3goldens
Apr 20, 09:03 AM
"three people familiar with the matter"
Please! GIve us a break!
Please! GIve us a break!
fxtech
Mar 30, 06:50 AM
WOW... what a perfect specimen you are not
Got your sarcasm blinders on?
Got your sarcasm blinders on?
rpenzinger
Apr 21, 02:52 PM
I hope this is true because I'd like to replace my going-on 4 year-old PC with a Mac Pro at some point, but the current case just won't fit in the IKEA wardrobe I'm using as a workstation. It sounds like this new Mac Pro would be smaller than my existing PC. Yea Apple!
Funny to see you are basing a $4000 computer purchase on a $79 piece of crap-KEA furniture - LOL. I'm with you on Yea Apple!
Funny to see you are basing a $4000 computer purchase on a $79 piece of crap-KEA furniture - LOL. I'm with you on Yea Apple!
Captain Planet
May 7, 01:08 PM
Oh man! That would be great... but I have a hard time seeing Apple do this. I'd be happy with like a "basic" version that'd be free... and for those who want the whole package, some sort of fee... but not $99 per year. Only time will tell I guess.
aricher
Jul 30, 09:27 AM
Also, I have a hard time believing that there is a " tech-unsavvy" photographer doing any work for Apple. Sounds a bit bogus to me.
I used to work as a photo studio manager back in the early/mid 90s. We shot a ton of new products for Motorola back then including one of the first ever small flip phones - the StarTac. The photographer was asked to sign an NDA but the stylist, caterer and me were not. First thing I did when I got out of the shoot that day was tell all my teck-savvy friends about this cool new phone from Moto - but at least I snagged a polaroid to prove it.
That said, this "leak" feels bogus to me as well. I guess we'll see soon enough.
I used to work as a photo studio manager back in the early/mid 90s. We shot a ton of new products for Motorola back then including one of the first ever small flip phones - the StarTac. The photographer was asked to sign an NDA but the stylist, caterer and me were not. First thing I did when I got out of the shoot that day was tell all my teck-savvy friends about this cool new phone from Moto - but at least I snagged a polaroid to prove it.
That said, this "leak" feels bogus to me as well. I guess we'll see soon enough.
BaldiMac
May 4, 02:49 PM
How would one do a "complete fresh reinstall" by this method? Or will we be able to burn to a disc/USB key?
I would hope that creating a bootable DVD/flash drive would be part of the installation process.
How is it handled now for developers with the Lion preview?
I would hope that creating a bootable DVD/flash drive would be part of the installation process.
How is it handled now for developers with the Lion preview?
markfc
May 9, 02:36 PM
I don't know if anyone has mentioned this so far, but to me it is very obvious the reason why some features will be free.
The iChat and a/v integration on the next iphone.
Obviously iChat needs either a mobile me email address, or an AIM username, or some other less common ones.
Needless to say, AIM is not very popular outside of USA. Everyone uses hotmail or gmail afaik.
If they really want to plug the new iChat, they need to get as many people using it as possible, so therefore the @me email addresses will probably become free, and maybe more features with it
Yep I mentioned this already! ;-)
makes sense to me, why send people to aim just to get iChat working on iPhoneHD!
The iChat and a/v integration on the next iphone.
Obviously iChat needs either a mobile me email address, or an AIM username, or some other less common ones.
Needless to say, AIM is not very popular outside of USA. Everyone uses hotmail or gmail afaik.
If they really want to plug the new iChat, they need to get as many people using it as possible, so therefore the @me email addresses will probably become free, and maybe more features with it
Yep I mentioned this already! ;-)
makes sense to me, why send people to aim just to get iChat working on iPhoneHD!
syc23
Apr 26, 03:53 PM
Fiat owns 85% of Ferrari.
Volkswagen owns 49.9% of Porsche.
Yes I know that they operate under their parent group so what's your point? I salute you for having the ability to google that information.
Volkswagen owns 49.9% of Porsche.
Yes I know that they operate under their parent group so what's your point? I salute you for having the ability to google that information.
iRobby
Mar 27, 03:52 AM
I believe the iPad 3 out in thee. Fall to be BS.
I believe iPhone 5 and IOS 5 to be released TOGETHER whether in June or the Fall.
My #1 request for iPhone 5?is 64GB. My 32GB 3GS only has 0.68GB available.
I believe iPhone 5 and IOS 5 to be released TOGETHER whether in June or the Fall.
My #1 request for iPhone 5?is 64GB. My 32GB 3GS only has 0.68GB available.
macnews
Apr 25, 09:21 AM
I have to wonder if this email is accurate. It could be another bunch of FUD being put out there in an attempt to make it look like Apple isn't taking this seriously.
Is it serious? Yes and no. Sure the data isn't being sent to Apple but there is no way to "opt out" of it and that is what many people have issues with. Then again, they will have issues with it until they need to track someone - like a lost loved one or a cheating spouse (I'm sure this has majorly freaked out some cheaters!).
I also have to wonder how long before we get proof many other phones do this - not just android either, I've got a sneaky suspicion more phones do this than people realize.
Is it serious? Yes and no. Sure the data isn't being sent to Apple but there is no way to "opt out" of it and that is what many people have issues with. Then again, they will have issues with it until they need to track someone - like a lost loved one or a cheating spouse (I'm sure this has majorly freaked out some cheaters!).
I also have to wonder how long before we get proof many other phones do this - not just android either, I've got a sneaky suspicion more phones do this than people realize.
mscriv
Apr 14, 10:23 AM
But every American should be chipping in to solve the issues that we're facing.
We're in the lifeboat, and the water's rising. Everybody pick up a pail and start bailing.
Admittedly, I didn't read the article posted by rdowns, but from reading the quotes he put in the OP, I'd have to say I disagree somewhat with your comments. Sure, we should all be working together, but the point is that those who are making the most are not paying at the same share/percentage as those who are lower or middle income.
Is it fair and in line with "everyone chipping in" if the person making $50,000 a year has to pay 20+% of their income, but the person making $1,000,000 a year only has to pay 16%?
Additionally, let's not forget that there is a lot of tension between "everyone chipping in" and the select few who make the decisions about how what has been "chipped in" gets spent. I have no problem doing my part to pay taxes as I do benefit from roads, schools, etc., but I do have a problem with a lot of the wasteful ways in which tax money is spent. We could all benefit from some efficiency, improved budgeting, and controlled spending on the government level.
We're in the lifeboat, and the water's rising. Everybody pick up a pail and start bailing.
Admittedly, I didn't read the article posted by rdowns, but from reading the quotes he put in the OP, I'd have to say I disagree somewhat with your comments. Sure, we should all be working together, but the point is that those who are making the most are not paying at the same share/percentage as those who are lower or middle income.
Is it fair and in line with "everyone chipping in" if the person making $50,000 a year has to pay 20+% of their income, but the person making $1,000,000 a year only has to pay 16%?
Additionally, let's not forget that there is a lot of tension between "everyone chipping in" and the select few who make the decisions about how what has been "chipped in" gets spent. I have no problem doing my part to pay taxes as I do benefit from roads, schools, etc., but I do have a problem with a lot of the wasteful ways in which tax money is spent. We could all benefit from some efficiency, improved budgeting, and controlled spending on the government level.
CalBoy
May 4, 07:01 PM
So what is a third of 13/16th of an inch? :)
Easy. 13/48ths of an inch.;)
A child's mind is amazingly attuned to learning language. Given the fascinating cultural and linguistic diversity in the world, I am envious. I would love to have learnt more than one language as a kid. It's so much harder to learn as an adult.
But I am not at all envious of you having to learn two systems of measurement. That kind of cultural diversity I can do without! Sure, your kids will be able to handle it, but why should they have to? Because your generation was too stuck in its ways to embrace positive change?
I really don't see much functional difference between a language and a system of measures. Both express specificity using prearranged syntax and values.
The one point you may have is that most households don't teach both to their kids because most households only use one or the other.
Even beyond that, if we were to adopt the metric system 100% starting tomorrow, the transition would have to last for decades not only to encompass those who are too old to be educated, but also to deal with the infrastructure changes that would have to take place. At the very earliest it would be my grandchildren who would see a fully metricized US.
The long-term advantages are:
1) Less freaking-out of kids who are weak in math. "If you have a stick that is 3' 7 13/16" and need to divide it into 3 equal sections, what is the length of the each section to the nearest 1/64 inch?" as opposed to "If you have a stick that 1233 mm long....." - and no, I didn't check to see if they are the same -
2) Same idea as above.... "If you have a tank filled with 450 cubic yards of water, and it is flowing out at a rate of 3 gallons a minute, how long does it take to empty?" as opposed to the metric system where 1000 litres of water is 1 cubic meter which is 1 tonne (approximately - since altitudes and temperatures affect the density of water).... but it's close enough for horseshoes....
This isn't an economic gain. It's a purely convenience gain for kids who probably should do some "difficult" math so they can get a strong grasp of the basics. They can use calculators and apps when they need to use their skills for larger applications.
3) Manufacturing. As the last industrialized country in the world still non-metric, do people really believe that there isn't a cost when a US factory has to retool to provide a product for export? Or understand that the cost of goods being imported from off-shore includes the cost of retooling for an non-metric customer? Do people not think that some small factories in the US have lost contracts to off-shore customers because they couldn't afford to switch to a metric size? And that some US factories have probably been forced to retool anyway when the sole supplier of a component wouldn't make a special run of non-metric fasteners?
And I don't dispute this element of the argument. Many manufacturers have already done this (why just yesterday I purchased cereal and chips in metric quantities), and they should keep switching to improve their bottom line.
Easy. 13/48ths of an inch.;)
A child's mind is amazingly attuned to learning language. Given the fascinating cultural and linguistic diversity in the world, I am envious. I would love to have learnt more than one language as a kid. It's so much harder to learn as an adult.
But I am not at all envious of you having to learn two systems of measurement. That kind of cultural diversity I can do without! Sure, your kids will be able to handle it, but why should they have to? Because your generation was too stuck in its ways to embrace positive change?
I really don't see much functional difference between a language and a system of measures. Both express specificity using prearranged syntax and values.
The one point you may have is that most households don't teach both to their kids because most households only use one or the other.
Even beyond that, if we were to adopt the metric system 100% starting tomorrow, the transition would have to last for decades not only to encompass those who are too old to be educated, but also to deal with the infrastructure changes that would have to take place. At the very earliest it would be my grandchildren who would see a fully metricized US.
The long-term advantages are:
1) Less freaking-out of kids who are weak in math. "If you have a stick that is 3' 7 13/16" and need to divide it into 3 equal sections, what is the length of the each section to the nearest 1/64 inch?" as opposed to "If you have a stick that 1233 mm long....." - and no, I didn't check to see if they are the same -
2) Same idea as above.... "If you have a tank filled with 450 cubic yards of water, and it is flowing out at a rate of 3 gallons a minute, how long does it take to empty?" as opposed to the metric system where 1000 litres of water is 1 cubic meter which is 1 tonne (approximately - since altitudes and temperatures affect the density of water).... but it's close enough for horseshoes....
This isn't an economic gain. It's a purely convenience gain for kids who probably should do some "difficult" math so they can get a strong grasp of the basics. They can use calculators and apps when they need to use their skills for larger applications.
3) Manufacturing. As the last industrialized country in the world still non-metric, do people really believe that there isn't a cost when a US factory has to retool to provide a product for export? Or understand that the cost of goods being imported from off-shore includes the cost of retooling for an non-metric customer? Do people not think that some small factories in the US have lost contracts to off-shore customers because they couldn't afford to switch to a metric size? And that some US factories have probably been forced to retool anyway when the sole supplier of a component wouldn't make a special run of non-metric fasteners?
And I don't dispute this element of the argument. Many manufacturers have already done this (why just yesterday I purchased cereal and chips in metric quantities), and they should keep switching to improve their bottom line.
-x-
Aug 11, 07:31 PM
I also expect the Mac Mini to receive a dual-core Merom.
That may not be true since the mini is suppose to be cheap. The cheapest Conroe is $60 less then the cheapest meron.
I wonder however if the engineers can do it. Lets see what happens.
That may not be true since the mini is suppose to be cheap. The cheapest Conroe is $60 less then the cheapest meron.
I wonder however if the engineers can do it. Lets see what happens.
BlizzardBomb
Jul 23, 05:59 AM
I posted this question in another thread but no one has answered it, so... I was wondering what thoughts you had on this:
Will this upgrade to Core 2 Duo be considered a RevB strictly speaking, for the iMacs? I mean, since it's a new generation of Intel chip as opposed to a speed bump of an existing chip, is it likely to cause any unknown bugs or dramas that the Core Duos didn't?
I'm in the market for a new iMac when they put the new chips in, but I want to be confident that this time they'll have ironed out all the bugs from the initial release of Intel iMacs, plus not be likely to have new bugs caused by the new architecture of the Core 2 Duos.
Thoughts?
Chuck.
If iMacs get Merom its highly likely there'll be 0 new problems. If they get Conroe there is a very very small possibility of heat issues.
Will this upgrade to Core 2 Duo be considered a RevB strictly speaking, for the iMacs? I mean, since it's a new generation of Intel chip as opposed to a speed bump of an existing chip, is it likely to cause any unknown bugs or dramas that the Core Duos didn't?
I'm in the market for a new iMac when they put the new chips in, but I want to be confident that this time they'll have ironed out all the bugs from the initial release of Intel iMacs, plus not be likely to have new bugs caused by the new architecture of the Core 2 Duos.
Thoughts?
Chuck.
If iMacs get Merom its highly likely there'll be 0 new problems. If they get Conroe there is a very very small possibility of heat issues.
adbe
Apr 5, 01:43 PM
That takes some balls.
You might well think that if you didn't bother to read the article.
You might well think that if you didn't bother to read the article.
AppleKrate
Sep 16, 08:01 AM
There is no way the MBP's will recieve resolution upgrades before Leopard. Santa Rosa MBP's will definiantly be bumped to 1680x1050 and 1920x1200. Tiger is resolution dependent, which means that a higher DPI would make it nearly impossible to see anything.
Tiger also has a lot of controls to increase system level font sizes plus ZOOM so I don't think going higher res would be a problem with Tiger.
But please tell us more of what you know about resolution independence with Leopard and what new display technologies coming next year?
I too am interested in the display and related resolution questions.... A 17" MBP for used for video editing would make much more sense with a HD screen ie >1920x1080 (Sony already sell a 1920x1200 machine http://b2b.sony.com/Solutions/product/VGN-AR290G has a blu-ray burner too...)
Tiger also has a lot of controls to increase system level font sizes plus ZOOM so I don't think going higher res would be a problem with Tiger.
But please tell us more of what you know about resolution independence with Leopard and what new display technologies coming next year?
I too am interested in the display and related resolution questions.... A 17" MBP for used for video editing would make much more sense with a HD screen ie >1920x1080 (Sony already sell a 1920x1200 machine http://b2b.sony.com/Solutions/product/VGN-AR290G has a blu-ray burner too...)
munkery
Nov 7, 07:28 PM
I've always thought virii has to be engineered under contract by companies making the "solutions" to them, there are far too many virii out there on a daily basis, to such an extent that it has to be developed on a full-time basis with some corporate involvement somewhere. There are a lot more things to do for kicks these days, other than write malware, you'd think people have better things to do, unless there is money in making them.
Take what you want from here (http://www.exploit-db.com/) and build your malware with this (http://www.metasploit.com/). Malware writers use the same software as security researchers.
It is actually pretty easy to do using sources for already known exploits; finding new exploits is the difficult part. Some of the exploits in an exploit database may not be patched. Others may be patched for up to date systems but are meant for those not getting updates (for example, because running pirated version of an OS).
Take what you want from here (http://www.exploit-db.com/) and build your malware with this (http://www.metasploit.com/). Malware writers use the same software as security researchers.
It is actually pretty easy to do using sources for already known exploits; finding new exploits is the difficult part. Some of the exploits in an exploit database may not be patched. Others may be patched for up to date systems but are meant for those not getting updates (for example, because running pirated version of an OS).